Operating Instructions
46
Cleaning and Care
The Exterior of the Appliance
0 Wipe the front of the appliance with a soft cloth and warm water with
washing up liquid.
• Do not use scourers, caustic cleaners or abrasive items.
• In the case of stainless steel fronts, you may use commercially
available stainless steel cleaners. These also provide a protective film
against finger marks.
Oven Interior
0 1. Wipe the oven clean after each use with water and washing up liquid
with a little vinegar added.
2. Then rub the oven dry with a cloth.
3. In the case of stubborn soiling, clean using pyrolysis.
3
Note: The use of pyrolysis makes oven spray unnecessary.
1
Important: If you, nevertheless, use an oven spray, please ensure that
you follow the manufacturer’s instructions!
Cleaning with Pyrolux
You have 3 different ways of affecting the time taken for pyrolysis:
You can select two different durations for pyrolysis. And with the aid of
the clock you can set pyrolysis to start automatically later:
• In the case of heavy soiling, please use the suggested duration of
2 hours and 30 minutes.
• In the case of only light soiling, please select the shorter duration of
1 hour and 30 minutes.
• If, for example, you would like to perform pyrolysis overnight, also
enter the time when you want pyrolysis to end.
1
Warning: The oven will become very hot during pyrolytic self-cleaning.
It is therefore imperative that small children be kept away!
Important: Prior to the performance of pyrolysis, the oven must be
completely emptied, with the exception of the side rails (not fitted to
models with a baking drawer)! Also remove the fat filter!
To Next Page