Operating Instructions
48
Setting the End of Pyrolysis Using the Clock
0 1. Select PYROLYSIS oven function.
2. Set the pyrolysis duration (long or shortened).
3. Within 10 seconds, select the END clock function.
4. Using the + button, enter the time at which you want pyrolysis to end.
The clock calculates the start time and automatically switches on pyro-
lysis at the calculated time, and then off again on completion.
5. When pyrolysis is finished, switch off the appliance.
3
During pyrolysis the door is locked and oven lighting is disabled.
Accessories
0 After each use rinse all slide-in parts (shelf, fat tray, etc.) and dry well.
Soak briefly to make them easier to clean.
Fat Filter
0 1. Clean the fat filter in hot water and washing up liquid, or in your dish-
washer.
2. In the case of burnt on soiling, boil in a little water with 2-3 dessert
spoons of dishwasher detergent.
To Next Page