Operating Instructions
54
Fitting the Top Door Glass
0 1. Guide the pane of glass at an angle from above into the middle of the
retaining section on the lower edge of the door (1).
2. Lower the pane of glass (2) and align it laterally such that the outer
edges of the glass lie centrally on the door frame (3).
3. Replace the retaining sections on the left and right such that the
rebates are opposite each other at the lower edge of the door (1).
4. Re-fit and tighten the cross-head screws on the left and right (2).
Check that the retaining sections are correctly seated!
5. Refit the oven door.
To Next Page
Loading...
