16
Inserting the Shelf and Tray
3 Anti-tip device
All slide-in units have a small bulge on the left and right. This bulge is
an anti-tip device and must always point to the rear of the oven.
Inserting tray:
The anti-tip device must point to-
wards the rear of the oven.
Inserting shelf:
Insert the shelf unit with both guide
rails pointing upwards. The anti-tip
device must point downwards and
be positioned to the rear of the
oven compartment.
Inserting shelf and tray:
When using the shelf and the tray
together, insert the shelf’s anti-tip
device exactly into the indentations
in the tray.
To Next Page
Loading...
