23
Cook time and End time combined
3 Cook time and End time can be used simultaneously, if the oven is
to be switched on and off automatically at a later time.
1. Using the Cook time function, set
the time required for cooking the
dish.
In this example, 1 hour.
2. Using the End time function, set
the time at which the dish should
be ready.
In this case 14:05:00.
The function indicators Cook
time and End time light up
and the current time is shown in the
display.
In this case 12:05.
The oven switches on automatically
at the time calculated.
In this case, at 13:05:00.
And switches itself off again when the cooking time entered has
elapsed.
In this case, at 14:05.
To Next Page
Loading...
