1.3
1.3-06
2/4/5!ْܾথ၍܋ጱ
ࠦۨ๕Ă؏๕ࢅ؏๕ୟഗದᆶԢ! 4:߲থ၍ۅDŽ܋
ጱDžڦޤዺথ၍ӱăኄၵথۅ࿋ᇀยԢۥևࢅኟ௬Ljᅟ
ᇀথă
සࡕሞ߾ҾጎڦຕଉႴᄲגࡗ! 4:! ߲থۅLjሶጲ
ۯሺڼܾ߲܋ጱӱăසࡕሞ၄ׇҾጎLjీႴᄲܮ
ྔڦ܋ጱӱă
۩ࠔၘဦ႑တ
HTEGUS3!519141
ܔᇀࠦۨ๕ยԢLjದᆶ!89!߲থۅDŽ܋ጱӱ!B!ࢅ!CDžڦ
ኝ༫܋ጱӱᆩፕԢă
HTEXU!519164
ܔᇀ؏๕ยԢLjದᆶ! 4:! ߲থۅڦ܋ጱӱᆩፕ
ԢDŽ܋ጱӱ!CDžă
..!܋ጱӱሞ!551W!BD!ࢅ!361W!ED!ཉူڦܮۨኵྺ!
7Băᅜᇑ࿄ঢ়ࡗጚԢڦཉႚڞ၍ದࢇ๑ᆩLjᆩᇀದᆶ
ׁႚ࣍ႚ܋ጱڦڞ၍ă
܋ጱথ၍ࢅᆩ൩֖ူᅃᄻă
ڦ܋ጱݴದ
..!܋ጱӱ!B!൩֖!2/27
..!܋ጱӱ!C!൩֖!2/28
..! ڦۨᅭĂՔധࢅᆩᅜ܋ጱӱথຕ൩֖
!2/29ă
BREAKER
ୟഗ
1.3.4 SECONDARY DISCONNECT TERMINAL BLOCKS
Breakers in Fixed PaƩern, casseƩes and breakers in draw out mode
are always supplied with and auxiliary connecƟon block with 39
connecƟon points (terminals) . These are easily accessible and
located at the top and front of the device.
When the number of factory installed accessories require more
than 39 connecƟon points needed a 2nd terminal block is
automaƟcally added. In cases where the accessories are mounted
in the Įeld
Ordering details
GSDFTR2 408030
For devices in a Įxed paƩern a full set of terminal blocks with 78
connecƟons (Block A & B) is available as a spare..
GSDWT 408053
For devices in a drawout paƩern an addiƟonal terminal block
with 39 connecƟon points is available as a spare (BLOCK B).
-- The terminals can be used up to a raƟng of 6A at 440V AC or
6A at 250V DC. They can be used with unprepared stripped
conductors and are suited for use with conductors equipped
with spade or ring type terminals.
SchemaƟcs and use of terminals see next page.
Assignment of terminals to accessories
-- Block A see table 1.16
-- Block B see table 1.17
-- DeĮniƟon of accessories, their labelling and use, with terminal
block connecƟon data see table 1.18.
Ҿጎ
!2/2:ǖ܋ጱದ၍0Ubcmf!2/2:;!Ufsnjobm!Xjsjoh
܋ጱຕଉ0Ovncfs!pg!Ufsnjobmt!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!89
܋ጱඹଉ0Ufsnjobm!dbqbdjuz
அۤ๕DŽڞ၍Dž0Tdsfx!uzqf!)cbsf!dpoevdupst*!!!!!!!!!!2y!1-46!.!3-6!nn²<!33.23!BXH
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!3y!1/46!.!3/6!nn²<!33.25!BXH<
࣍ႚ0ׁႚ܋ጱဣཥ0Sjoh0tqbef!ufsnjobm!tztufn!!!!!!!!!!!!!!2y!1-6!.!3-6!nn²<!31.23!BXH<
NF1:ဣଚگუഘୟഗ
To Next Page
Loading...