1.1
ᆅჾ
1.1-02
ዊଉԍኤ
ᆶ!NF1:!ୟഗۼӀቷፌߛຍՔጚยࢅሰă
BFH!֑ᆩჹ߭ڦײႾඓԍٳڟภڦຍՔ
ጚժԍኤᅃୁڦׂዊଉă
ֱֱ
߲ୟഗۼᆶֱLjଚକୟഗĂ؏ࢅۉ
ጱྃഗDŽස۩ࠔDžԈࡤڦ༬Ⴀࢅă
ణࡽຫ
֖ă
ׂဣଚࡽ
ᇑ! BFH! ৽ԨยԢᆶ࠲๚ᅓႜࠏཚ้Lj൩ຫဣଚࡽă
߲ୟഗۼᆯᅃ߲༬ᆶڦဣଚࡽLj࿋ᇀᅜူଇ߲࿋ዃǖ
噝!ฦ༵ืڦۥև
噝!മ௬ӱፑ֨DŽٗኟ௬Dž
2/2/2!ׂᄲຫ
NF1:ഘୟഗྺഘୟഗLjยޙࢇ!
HC25159/3.3119ՔጚăԨ֩ጆᆩᇀޙࢇ! JFD0FO!
71:58!ՔጚڦยLjසႴഄՔጚLj൩ဣ்ă
ԨยԢยᆩᇀۉუፌߛྺ!2111W!BD!!861W!ED!ڦྪ
ஏLjժᅜᇑNF1:! ࢅ! NN:0ND:ୟഗದLjํ၄ስ
Ⴀԍࢺă
ԨยԢྺ!4!!5!ยԢLjৈᆶᅃዖLjۉୁܮۨኵྺ!
6111!ڟ!7511!Ҿಢă
ፕྺୟഗLj6111.7511BୟഗᅜದԢܾዖۉጱۉጱྃ
ഗዐڦഄዐᅃዖLjܾዖڇᇮᆶཥᅃڦยዃহ௬ࢅ!MDE!
၂๖ೡă
BREAKER
ୟഗ
2/2!ᆅჾ
1.1 INTRODUCTION
Quality Assurance
All ME09 circuit breakers have been designed and manufactured to
the highest technical standards.
AEG uses strict procedures ensuring that the menƟoned
technical standards are met whilstmaintaining a Įrst class
product quality.
OpƟons Check Sheet
Each circuit breaker comes with an opƟons check sheet that lists
all opƟonal features and accessories included in the circuit
breaker, casseƩe and trip unit (if ordered)
Catalogue number descripƟon
see Appendix
Product Serial Number
When communicaƟng with AEG on any aspects of this device
please menƟon the serial number. Each circuit breaker has a
unique serial number located in two places:
• On the top face of one of the retractable liŌing brackets.
• On the leŌ side (viewed from front) of the front cover.
1.1.1 Short Product descripƟon
The EntelliGuard™ G Power Circuit breaker is an Air
Circuit Breaker designed to meet the Global ANSI, UL and IEC
standards. This manual being speciĮcally dedicated to the
design meeƟng the IEC/EN 60947 standard, for other standards
please contact us.
The device is designed for use in networks with voltages up to
1000V AC or 750V DC and to be fully selecƟve with other
EntelliGuard and GE Record Plus Circuit Breakers.
It is available as 3 or 4 pole device in three envelopes and can be
used for current raƟngs from 80 up to 6400 Amps.
As a breaker the EntelliGuard™ G can be equipped with one of
four Electronic Trip Unit types each having the same universal
seƫng interface and an LCD screen.
NF1:ဣଚگუഘୟഗ
To Next Page
Loading...