AEG PROTECT 1 LCD - UPS Shutdown

5.8 UPS shutdown
Shutdown the UPS with utility power mode:
1. UPS working with utility power, press the button for more than 3s, the LCD pops
up to confirm the shutdown page.
2. After clicking Confirm, the UPS performs shutdown.
3. After shutdown, the UPS works in bypass mode and the output remains
powered.
4. If there is no need the UPS output, disconnect the input utility power.
Shutdown the UPS with battery mode:
1. Press the button for more than 3s, the LCD pops up to confirm the shutdown
page;
2. After clicking Confirm, the UPS performs shutdown.
3. The UPS output is interrupted and goes into standby mode. After a few
seconds, the UPS automatically shuts down.