AEG PROTECT 1 LCD - 6 Communication; RS232 and USB Connectivity; Remote Control Functions

6.1 RS232 and USB
1. Communication cable to the serial or USB port on the computer.
2. Connect the other end of the communication cable to the RS232 or USB
communication port on the UPS.
6.2 UPS remote control
functions
• Remote Power Off (RPO
Remote Power Off (RPORemote Power Off (RPO
Remote Power Off (RPO ）
When RPO is activated, UPS will cut off output immediately, and continues to
alarm.
RPO
RPORPO
RPO Comments
CommentsComments
Comments
Connector type 16 AWG Maximum wires
External breaker specification 60 V DC/30 V AC 20 mA max
Reset ：
1. Check the RPO connector status;
2. Clear fault state through LCD.
• Dry in
Dry inDry in
Dry in
Dry in function can be configured. (see Settings > Dry in)
Dry in
Dry inDry in
Dry in Comments
CommentsComments
Comments
Connector type 16 AWG Maximum wires
External breaker specification 60 V DC/30 V AC 20 mA max
6 Communication