Need help?Do you have a question about the AEG PROTECT 1 LCD and is the answer not in the manual?
Describes warning symbols used in the manual for electrical shock and disposal.
Discusses risks and precautions for personnel handling the UPS and its batteries.
Covers general safety precautions for the UPS unit, including wiring and environment.
Details specific precautions for handling, installation, and operation of the UPS.
Lists key technical specifications and capabilities of the UPS, such as double conversion and communication ports.
Discusses eco-design, substances, packing, product, and battery disposal in compliance with regulations.
Details different UPS and EBM models with their weights and unit sizes.
Describes the front and rear views of the UPS unit, labeling key components and ports.
Describes the front and rear views of the External Battery Module (EBM), labeling key features.
Guides on unpacking the unit, inspecting for damage, and handling shipping issues.
Provides guidance on physical installation requirements, including clearance and grounding.
Explains how to wire AC IN/OUT cables to the UPS in different modes.
Guides on connecting external battery modules (EBM) to the UPS via DC source.
Instructions for installing cable glands to secure and manage wiring.
Details wiring AC/DC cables for parallel UPS systems, including length requirements.
Covers connecting EBMs to UPS in parallel systems, for independent or common battery setups.
Explains how to connect parallel signal cables between UPS units for system communication.
Describes the steps for operating multiple UPS units in parallel mode.
Describes the UPS touch graphical LCD, its controls, and elements displayed on screen.
Illustrates the navigation hierarchy of the UPS menu system for settings and control.
Lists configurable user settings for the UPS, including alarms, language, and input/output parameters.
Guides on powering up the UPS using utility or battery power and shutting it down.
Explains how to connect the UPS to a computer via serial and USB ports.
Describes remote control features like Remote Power Off (RPO) and Dry In/Out functions.
Explains the relay output (Dry Out) function and its configuration.
Provides advice on keeping the UPS clean and maintaining optimal ambient temperature.
Recommends using original packaging and ensuring the UPS is disconnected before transport.
Guides on proper storage procedures, including battery recharge intervals for long-term storage.
Information on proper disposal and recycling of the UPS and its lead-acid batteries.
Explains how to check logs and identify common UPS alarms and faults for troubleshooting.
Shows a functional block diagram of the UPS, illustrating its main internal components.
Details technical specifications for different UPS models, including input, output, and battery parameters.
To Next Page
General