AEG PROTECT 1 LCD - User Settings

5.4 Control and product
information
5.5 User settings
Main menu
Main menuMain menu
Main menu Submenu
SubmenuSubmenu
Submenu Menu function
Menu functionMenu function
Menu function
Control
Battery test
Starts a manual battery test in stand-alone
mode
Battery test (Parallel) Starts a single battery test in parallel mode
Reset fault Clear active fault
Reset factory setting Restore to default factory settings
Single UPS shutdown
Operate this machine to exit parallel connection
Product
Info
UPS model Model name & input/output phase
Serial number Serial number of UPS
UPS firmware version Version of UPS firmware
LCD firmware Version of UI
JHD-APP version Version of LCD driver
Setting
SettingSetting
Setting Options on the display
Options on the displayOptions on the display
Options on the display Default
DefaultDefault
Default
General
Audible Alarm [Enabled], [Disabled] Enabled
Date/Time YYYY-MM-DD HH:MM 2020-1-1
Language
English, Italiano, Français,
Deutsch, Español, Русский,
Polski, 简体中文
English
LCD brightness [0%-100%] 100%
LCD saving mode [Enabled], [Disabled] Enabled
Screen rotation
[Auto Rotate], [Horizontal],
[Vertical]
Auto Rotate
Input
Site wiring fault
(1)
[Enabled], [Disabled] Disabled
Bypass voltage low limit 110 ~ (V_inverter - 15V) 187V
Bypass voltage high limit (V_inverter + 15V) ~ 276V 264V
Bypass frequency low limit -10%~-5% -10%
Bypass frequency high limit 5%~10% 10%
HE voltage low limit -15%~-5% 10%