37
Messages and alarms
Press “▼” to access part 2 of the UPS status display. It contains current
messages and alarms, if any. Each message or each alarm is displayed
in its own window and you can press “▼” to scroll through them.
If there is no information available, the following message will appear:
“No active alarms”.
Events are listed and stored in the “Event log” only (a separate menu
item) with the corresponding date and time.
Part 3 of the UPS display contains information on the battery status; it
can also be accessed by pressing “▼”.
Battery status display Description
Battery charge Batteries are currently charging
with constant current.
Battery float charge Batteries are currently being
supplied with constant voltage.
Battery discharge Batteries are currently discharging,
e.g. due to an upcoming power
outage.
Battery disconnected Battery system not available
because e.g. currently not
connected.
To Next Page
Loading...
