4. To activate the Signal, touch the above button again until the
symbol disappears.
6.7 Fertig In
This option allows choosing the time at which a programme
should terminate. Once activated the machine waits for the right
moment to begin the drying process.
Fertig In time is the sum of stand by time and drying time.
To set the Fertig In option:
1. Set the drying programme and options.
2. Touch Fertig In repeatedly until the display shows the desired
time within the programme should end (e.g.
if the
programme has to finish within 12 hours.)
3. Touch the Start/Pause button. The drum starts rotating to
perform the ProSense estimation, if foreseen in the selected
programme.
4. The appliance starts the countdown to the end of the programme
and the programme will start at the right moment for ending.
28/64
OPTIONS
To Next Page
Loading...
