10. CARE AND CLEANING
10.1 Cleaning the filter
At the end of each cycle the
Sieb
symbol comes on the display
and you must clean the filter.
The filter collects the lint during the drying cycle.
To achieve the best drying performances clean the filter
regularly , clogged filter lead to longer cycles and energy
consumption increase.
Use your hand to clean the filter , and if necessary , a vacuum
cleaner .
CAUTION!
Avoid the use of water to clean the filter. Instead throw away lint
in the dustbin ( avoid dispersion of plastic fiber in water
ambient).
1. Open the door. Pull the filter up.
2. Push the hook to open the filter.
40/64
To Next Page
Loading...
