Dryness level Display symbol
Standard dryness
5. To memorise the setting touch and hold down the Trockenzeit
and Knitterschutz buttons at the same time for approximately 2
seconds.
9.3 Deactivating the tank indicator
The water container indicator is activated by default. It illuminates
at the end of the drying cycle or during the cycle if the water
reservoir is full. If the draining kit is installed the water container is
drained automatically and the indicator can be deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available programmes.
3. Touch and hold down Leise and Auffrischen buttons at the
same time.
One of 2 configurations is possible:
• the Behälter indicator:
is on if the symbol appears -
the water container indicator is permanently activated
• the Behälter indicator: is off if the symbol appears -
the water container indicator is permanently deactivated
39/64
HINTS AND TIPS
To Next Page
