How to fix AENO EK2 if it doesn't turn on?
If your AENO Kettle isn't turning on, first, ensure the power outlet is working by testing it with another appliance. If the outlet is functional, try removing the kettle from its stand and placing it back securely. If these steps don't resolve the issue, the power cord or plug may be damaged, requiring service center assistance.
Why does my AENO Kettle shut off too early?
Your AENO Kettle might be shutting off prematurely because there isn't enough water in it, or the water level is below the "MIN" mark, which activates the overheat protection. Ensure the water level is above the minimum mark and allow the kettle to cool down before you restart it. Another possible cause is scale buildup on the kettle's inner surface, which requires cleaning.
What to do if AENO Kettle has power and water but still won't turn on?
If your AENO Kettle has power and water but isn't turning on, it might be because it hasn't cooled down sufficiently after the overheat protection was triggered. Allow the device to cool completely before attempting to turn it on again. If it still fails to turn on, there may be a short-circuit in the electrical circuit, which requires service center assistance.
Why AENO EK2 doesn't turn off automatically?
If your AENO Kettle isn't automatically turning off after boiling, the lid might not be closed tightly. Ensure the lid is securely closed. If the problem continues, the switch might be defective, requiring service center assistance.
General| Capacity | 1.7 L |
|---|---|
| Heating Element | Concealed |
| Water Level Indicator | Yes |
| Keep Warm Function | Yes |
| Voltage | 220-240 V |
| Material | Stainless steel |
| Boil-dry Protection | Yes |
| Removable Filter | Yes |
| 360-degree Swivel Base | Yes |
| Body Material | Stainless Steel |
| Automatic Shut-Off | Yes |
To Next Page
