Installation and Operation Manual for electric kettle
Document version: 1.0.1, aeno.com
ASBISc Enterprises PLC. All rights reserved
3 Maintenance and repairs
To maintain optimal condition and stable operation of the device, it is
recommended to periodically perform the following actions:
clean the device body and the stand;
clean the inner surface of the device.
WARNING! Before cleaning the device, unplug it from the power outlet and
wait until it has cooled down completely.
3.1 Cleaning the device body and stand
To clean the body of the device from dirt and dust, first use a slightly damp cotton
cloth (napkin), then wipe with a dry one (see Figure 8).
If heavily soiled, wipe the body with a soft cloth moistened in a mild soap solution.
Then clean with a cloth moistened in water and wipe dry.
WARNING! Do not use chemicals, harsh detergents, abrasive pastes, acids,
solvents, or wire sponges that could damage the device and its coating.
To Next Page
Loading...
