Installation and Operation Manual for electric kettle
ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.1, aeno.com
Warnings and restrictions
Before using the device, carefully read the information contained in this section of
the document.
WARNING! The warnings, precautions, and instructions in this document
cannot cover all possible hazards. Use common sense when using the device.
The device is designed for:
adults;
children under the supervision of persons responsible for their safety;
people with disabilities who are physically able to operate and maintain the
device in accordance with this user manual.
The device should be operated only in a domestic environment and in the manner
described in this user manual. The device cannot be used outdoors. Failure to
follow the operating instructions in this manual may result in personal injury or
property damage.
1. The device is designed for use in the home, office and similar environments.
Do not use it in an industrial environment.
2. The device is intended only for heating and boiling water.
3. Place the device on a dry, level, and stable horizontal surface.
4. Do not install the device on a gas or electric stove, or near external heat
sources (open fire, hot surfaces, heating devices) or near other electrical
appliances. Protect from direct sunlight and other potential heat sources.
5. Do not use the device in areas with extreme temperature fluctuations, in a
humid atmosphere, or where the device or its stand may be splashed with
water, dripping or condensation, to avoid fire and/or electric shock.
6. Before using for the first time, make sure that the rated voltage indicated in
the technical documentation corresponds to the parameters of the mains
supply.
7. Connect only to a grounded power outlet. Do not use an extension cord.
8. Plug the power cord into and unplug it from the outlet only with dry hands.
9. Place the power cord so that it cannot be accidentally stepped on or caught
on.
To Next Page
Loading...
