Aeotec Door / Window Sensor 7 - Association and Command Parameters

Setting
Description
0
Do not se
nd alarm cancellation r e
port
1
Send
alarm cancellation
r
eport
Parameter 22: Enalbe/ disbale Binary Sensor report
Backwards compatibility, Binary Sensor.
Size: 1 Byte, Default Value: 0
Setting
Description
0
Disable
1
E
nable
Parameter 23: Report low battery report when level goes under threshold setting
Size: 1 Byte, Default Value: 20
Setting
Description
1
0
-
50
10
-
50%
Parameter 24: Report battery report at an interval set in hour
Size: 1 Byte, Default Value: 24
Setting
Description
0
Disable
1
-
255
1
-
2
55 hours
Parameter 255: Reset Parameter
This parameter helps reset configuration parameters and the device to factory defaults
Size: 4 Byte, Default Value: 0
Setting
Description
1
-
1431655764
Reset all Parameter settings to their default settings.
1431655765
Completely factory reset sensor and send device reset locally
notification.
Technical Data