AEOTEC Engineering Specification
Page 7
SCENE_ACTUATOR_CONF 1 Support Support
VERSION 2 Support Support
MANUFACTURER_SPECIFIC 2 Support Support
DEVICE_RESET_LOCALLY 1 Support Support
POWERLEVEL 1 Support Support
SECURITY 1 Support Support
SECURITY_2 1 Support Support
SUPERVISION 1 Support Support
APPLICATION_STATUS 1 Support Support
4.3 Basic Command Class mapping
Basic Set maps to Binary Switch Set.
Basic Get maps to Binary Switch Get
Basic Report maps to Binary Switch Report.
4.4 Z-Wave Plus Info
5 (ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_ALWAYS_ON)
0 (ZWAVEPLUS_INFO_REPORT_NODE_TYPE_ZWAVEPLUS_NODE)
0x0700 (ICON_TYPE_GENERIC_ON_OFF_POWER_SWITCH)
0x0700 (ICON_TYPE_GENERIC_ON_OFF_POWER_SWITCH)
4.5 Manufacturer Specific
Product Type ID 1
Product Type ID 2
Product ID 1
Product ID 2
To Next Page
Loading...
Need help?
General
