EasyManua.ls Logo

Aeotec Smart Switch 7 - Features & Specifications

Aeotec Smart Switch 7
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AEOTEC Engineering Specification
Page 2
2 FEATURES & SPECIFICATIONS
Parameter
Value
Product Identifier
ZW175-C16
Dimensions
43.4*43.4*68mm
Weight
56g
Color
White
Shell Material
PC-110N
Shell Surface Treatment
Mirror(upper shell), Bright fine lines(lower shell)
Shell Fire-proof Level
UL94 V-0
Waterproof and Dustproof
Rated IP20 under IEC 60529
Usage
For indoor use
Operating Temperature
32~104°F (0~40°C)
Relative Humidity
8%~80%
Wireless Technology
Z-Wave
Z-Wave Plus
Yes
Z-Wave Module
ZM5101
Z-Wave Version
6.81.03
Z-Wave Library Type
Enhanced 232 Slave
Z-Wave Device Type
On/Off Power Switch
Z-Wave Role Type
Always On Slave
Security Class
Non-Security, S0, S2 Unauthenticated, and S2 Authenticated
Smart Start Compatible
Support
Over The Air (OTA)
Support
Multi Channel Device
No
Association
Support
Factory Reset
Support
Power-down Memory
Support
Z-Wave Antenna Distance
30m (Indoor) /150m (Outdoor)
Plug and Socket Type
Plug Type E/F, Socket Type F
Indicator Light Color
RGB
Buttons and Connectors
Action Button (x1)
Input Voltage
230VAC, 50Hz
Battery Included
No
Battery Required
No
Working Current
7mA±5%(R.M.S) when switch is ON
Standby Current
4mA±5%(R.M.S) when switch is OFF
Maximum Output Current
10A(Resistive load)
Maximum Output Power
2300W
Maximum Standby
Power Consumption
0.8W
Meter Type and Scale
Type=Electric Meter; Scale=kWh(Power Consumption), W(Power), V(Voltage), A(Current)
Power Meter Accuracy
±3W(Less than 300W), ±1%(Over 300W)
Over-Current Protection
Support. Automatically disconnects the load when the current is over 11A.
Over-Load Protection
Support. Automatically disconnects the load when the power is over the threshold value.
Over-Heat Protection
Support. Built-in unrecoverable temperature fuse. Automatically disconnects the load when
the internal temperature exceeds the limit.
Switch Control Method
Wireless control with Z-Wave command or manually control with Action Button.
Night Light Mode
Support. Brightness and color can be customized by user.
Built-in Sensors
No built-in sensors
Safety Certifications
EU: CE

Other manuals for Aeotec Smart Switch 7

Related product manuals