AEP transducers MP2C - LOAD CELL AND TRANSDUCER CONNECTION (4 WIRES)

MP2C
Manuale operativo - Operating manual MO.MP2C.518
Pag. 50
Collegamento: CELLE DI CARICO e TRASDUTTORI 2 o 3 mV/V
4 fili (Connettore DB9 Femmina)
Connection: LOAD CELLS and TRANSDUCERS 2 or 3 mV/V
4 wires (DB9 Female connector)
1 = SEGNALE+ (Bianco)
2 = SEGNALE- (Giallo)
3 = ECCITAZIONE+ (Rosso)
4 = ECCITAZIONE- (Nero)
SCHERMO collegato al corpo metallizzato del connettore.
Colori riferiti al cavo standard AEP transducers.
1 = SIGNAL+ (White)
2 = SIGNAL- (Yellow)
3 = EXCITATION+ (Red)
4 = EXCITATION- (Black)
SHIELD is connected to the connector metal housing.
Colors are referred to AEP transducers standard cable.