AerAtron AE+2 Series - Inserting Fan Motor and Securing Safety Cord; Safety Cord Installation for Wooden Ceilings; Safety Cord Installation for Concrete Ceilings; Installing the Remote Control Receiver

Inserting an otor into Hanger Bracket and
=
STEP 4
Installing Receiver into Hanger Bracket
5
STEP 3
Wooden Ceiling (use Timber Screws)
Concrete Ceiling (use Expansion Bolts)
Secure Safety Cord Loop
with Timber Screw
Secure Safety Cord
Loop with Hook Bolt
Locate Suspension Ball in Hanger Bracket and secure the (loop) of the Safety cord to the
hook expansion bolt or secure the Safety cord loop to the Ceiling with the Timber Screw.
Ensure the safety cord is not stretched otherwise it will hinder the receiver sliding
through the hanger bracket.
Secure Safety Cord
Slide Remote Control Receiver
into Hanger Bracket from the
opposite side of the Terminal block
in the orientaon as shown below.
Oponal
Wifi module
Antenna