EasyManuals Logo

Aerco AM Series Application Guide

Aerco AM Series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Page 20 of 30 AERCO International, Inc. 100 Oritani Dr. Blauvelt, New York 10913 Phone: 800-526-0288 PR1 04/08/2014
GF-146-P
TAG-0074 0B
AM Series Piping
Application Guide
The AM Series of boilers and water heaters come equipped with a condensate trap and neutralizer
tank (see Figure 10). It is crucial that these be filled with water to prevent combustion gases from
entering the room and/or gases flowing backwards through the condensate line. A corrugated tube is
provided to pipe neutralized condensate to a drain. It may be necessary to add additional piping to the
condensate removal system in order to reach an appropriate drain.
Figure 10: Condensate Drain Assembly Components
WARNING!
The condensate collection box must be filled with water to prevent flue
gas emissions from escaping during unit operation. Failure to comply
with this requirement can result in dangerous levels of carbon monoxide
and other dangerous gases.

Other manuals for Aerco AM Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aerco AM Series and is the answer not in the manual?

Aerco AM Series Specifications

General IconGeneral
BrandAerco
ModelAM Series
CategoryBoiler
LanguageEnglish

Related product manuals