To Next PageTo Next Page
Need help?Do you have a question about the Aerco Benchmark 2.0 LN and is the answer not in the manual?
Covers installation, operation, and maintenance procedures for the boiler.
General warnings and cautions for installers and operators.
Procedures for emergency shutdown of the boiler.
Overview of boiler operating modes and field control wiring.
Detailed description of the boiler's control panel components.
Explanation of the control panel menu structure and navigation.
Configuration options for setup, communication, and system settings.
Settings for boiler mode, temperature limits, and other operational parameters.
Procedures for combustion calibration.
Step-by-step process for the boiler's start sequence.
Prerequisites and steps for the initial start-up procedure.
Necessary tools and instruments for combustion calibration.
Detailed procedure for calibrating combustion parameters.
Procedure to test the low gas pressure safety shutdown.
Procedure to test the high gas pressure safety shutdown.
Procedure to test the low water level safety shutdown.
Procedure to test the high water temperature safety shutdown.
Simulation and testing of flame fault conditions.
Testing of blower proof and blocked inlet airflow fault conditions.
Recommended routine maintenance schedule and procedures.
Covers installation, operation, and maintenance procedures for the boiler.
General warnings and cautions for installers and operators.
Procedures for emergency shutdown of the boiler.
Overview of boiler operating modes and field control wiring.
Detailed description of the boiler's control panel components.
Explanation of the control panel menu structure and navigation.
Configuration options for setup, communication, and system settings.
Settings for boiler mode, temperature limits, and other operational parameters.
Procedures for combustion calibration.
Step-by-step process for the boiler's start sequence.
Prerequisites and steps for the initial start-up procedure.
Necessary tools and instruments for combustion calibration.
Detailed procedure for calibrating combustion parameters.
Procedure to test the low gas pressure safety shutdown.
Procedure to test the high gas pressure safety shutdown.
Procedure to test the low water level safety shutdown.
Procedure to test the high water temperature safety shutdown.
Simulation and testing of flame fault conditions.
Testing of blower proof and blocked inlet airflow fault conditions.
Recommended routine maintenance schedule and procedures.
General