Aerco Benchmark 2.0 LN User Manual

Benchmark 2.0 LN Installation, Operation & Maintenance Manual
CHAPTER 3 – OPERATION
Page 40 of 168 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0046_0J
06/18/2015 Phone: 800-526-0288 GF-123
OPERATING
SETUP
CONFIGURATION
TUNING
COMBUSTION CAL
CALIBRATION
(NOT USED IN THIS O & M)
LEVEL 2 PWD
LEVEL 1 PWD
DIAGNOSTICS
(NOT USED IN THIS O & M)
Figure 3-2: Control Panel Menu Structure
NOTE
The following paragraphs provide brief descriptions of the options contained in
each menu. Refer to Appendix A for detailed descriptions of each menu
option. Refer to Appendix B for listings and descriptions of displayed startup,
status and error messages.
3.4 OPERATING MENU
The Operating Menu displays a number of key operating parameters for the unit as listed in Table
3-2. This menu is “Read-Only” and does not allow personnel to change or adjust any displayed
items. Since this menu is “Read-Only”, it can be viewed at any time without entering a password.
Pressing the ▲ arrow key to display the menu items in the order listed (Top-Down). Pressing the
▼ arrow key will display the menu items in reverse order (Bottom-Up).

Aerco Benchmark 2.0 LN Specifications

General

Brand	Aerco
Model	Benchmark 2.0 LN
Category	Boiler
Language	English