6
DESCRIPTION OF THE UNIT
PURPOSE OF THE FCLI CASSETTE MODULATING FAN COIL
The fan coil is a terminal used to treat air, both during winter and summer.
The Cassette modulating fan coils of the FCLI series with brushless type inverter motor (ie without brushes) are different from the
traditional fan coils because they offer a better climatic, acoustic comfort and energy saving.
- The set temperature is maintained
with utmost precision, the continuous
modulation of the fan speed prevents
oscillations due to speed changes or
succession of on-off cycles.
- The acoustic comfort is remarkable,
since there are no abrupt changes
between the various speeds, you
cannot hear the noise changes from
one speed to another, or the change
between off and on. The type of motor
and control used also allow a minimum
rotation speed must lower than that of
traditional models (even less than half)
and so, not only is the average noise
must lower, but above all it is the feeling
of actual noise (e.g. if the traditional
fancoil in a bedroom alternates cycles at
minimum speed and fan off cycles, what
we perceive is not the average noise,
but the noise of when it is running at
minimum speed).
- Energy saving thanks to the use
of brushless motor that allows for
greater efficiency, even under normal
conditions. For comparison we have
created a display that we will use
during fairs and events, where we have
installed two of our fan coils of the same
size, one with traditional motor and
the other with brushless. On an equal
number of motor revs (and so with same
air flow rate), the reduction in input
power of the fan coil with brushless
motor exceeds 50%. The inverter is a
system that automatically reduces the
revs and the input, allowing the fan
coil to work partialised, with significant
savings on annual management costs.
The more efficient distribution system
contributes in improving the energy
class of the building. The electronic
control of the number of revs allows
ensuring and controlling the peak
phase, avoiding input peaks typical
of this phase had with asynchronous
motors. Obviously these benefits
increase in the installation with the
increasing of the number of FCLI fan
coils present.
ADVANTAGES
Cassette Type Fan Coil with Inverter
for installation in suspended ceiling,
integrable in standard panels 600x600
and 840x840 in larger sizes.
The FCLI cassette type fan coil is a
terminal for the conditioning of air in
a room. The FCLI concentrates high
technological and functional features
that make it the ideal means for air
conditioning for all environments.
The supply of heated air is distributed
throughout the room thanks to the flow
louvers oriented in the four directions.
FCLI heats the room if included in a
heating system with boiler or heat
pump. However, it may also be used in
the summer as an air conditioner, if the
heating system has a water chiller.
The fan coils are designed for systems
with 2 and 4 pipes.
The unit is mounted in a suspended
ceiling with the possibility of sending
conditioned air to adjacent rooms and
introducing external air independently
from unit ventilation.
FCLI CASSETTE
MACHINE PURPOSE
The fan coil is a room air treatment terminal unit for both winter and summer operation.
FCLI VERSION
Cassette-type fan coil with Inverter for installation in suspended ceilings; can be integrated in standard 600x600 and
840x840 panelling.
DESCRIPTION OF THE UNIT
AVAILABLE SIZES
The cassette-type fan coils of the FCLI range are available in:
for 2-pipe systems
FCLI 32 (600x600)
FCLI 42 (600x600)
FCLI 62 (600x600)
FCLI 82 (840x840)
FCLI 122 (840x840)
For 4-pipe systems
FCLI 34 (600x600)
FCLI 44 (600x600)
FCLI 64 (600x600)
FCLI 124 (840x840)
GLLI100/GLFI10/GLLI100N/GLFI10N/GLFI10M/GLLI100EH/GLFI10EH -
To Next Page
Loading...
Need help?
General
