32
FWR 1406 - 5388000_02
The AERMEC unit is constructed with modern technologies
which ensure the efficiency an operation over time.
The only maintenance required is the cleaning of the filter to
have the optimal operation of the unit and, above all, the cor-
rect air filtration.
It is sufficient to periodically the filter, removing it from its posi-
tion.
Cleaning can be done with running water and normal deter-
gents. The filter must be completely dry before returning it into
position. Fortnightly cleaning can be sufficient for rooms that
are not excessively dusty.
– TO CLEAN THE UNIT:
Do not use spray water onto the unit. This
can cause electrical shocks or damage the
unit.
Do not use hot water, abrasive substances or
solvents; to clean the unit use a soft cloth.
PERICOLO
DANGER
CLEAN THE FILTER !
MAINTENANCE
To Next Page
Loading...
Need help?
General
