AERMEC S.p.A.
I-37040 Bevilacqua (VR) Italia – Via Roma, 44
Tel. (+39) 0442 633111
Telefax 0442 93730 – (+39) 0442 93566
www.aermec.com - info@aermec.com
Bevilacqua, 02/05/2002 Direttore Commerciale – Sales and Marketing Director
Luigi Zucchi
modello:
model:
numero di serie:
serial number:
DICHIARAZIONE DI CONFORMITA'
Noi, firmatari della presente, dichiariamo sotto la nostra
esclusiva responsabilità che l'insieme in oggetto così definito:
REFRIGERATORE D'ACQUA E POMPA DI CALORE RV
risulta :
1. conforme alla Direttiva 97/23/CE ed è stato sottoposto,
con riferimento all'allegato II della direttiva stessa, alla
seguente procedura di valutazione di conformità :
modulo B + C1
con controlli eseguiti mediante ispezioni dall'organismo
notificato RW-TUV Kurfurstenstrasse 58, D-45138 ESSEN,
numero distintivo 0044;
2. progettato, prodotto e commercializzato nel rispetto
delle seguenti specifiche tecniche:
Norme armonizzate:
- EN 378: Refrigerating system and heat pumps - Safety
and environmental requirements;
- EN 12735: Copper and copper alloys - Seamless, round
copper tubes for air conditioning and refrigeration;
Altre norme:
- UNI 1285-68: Calcolo di resistenza dei tubi metallici
soggetti a pressione interna;
3.progettato, prodotto e commercializzato in conformità
alle seguenti direttive comunitarie:
- Direttiva macchine 98/37/ CE ;
- Direttiva bassa tensione 73/23/CEE;- Direttiva compatibi-
lità elettromagnetica 89/336/CEE.
DECLARATION OF CONFORMITY
We declare under our own responsability that the above
equipment described as follows:
AIR TO WATER CHILLER AND HEAT PUMP RV
complies with following provisions:
1. 97/23/CE Directive, since as per enclosure II, it has
undergone the conformity testing procedure:
B + C1 module
with checkings carried out by the appointed body RW-TUV
Kurfurstenstrasse 58, D-45138 ESSEN, identity code 0044;
2. designed, manufactured and commercialized in com-
pliance with the following technical specifications:
Harmonized standards:
- EN 378: Refrigerating system and heat pumps - Safety
and environmental requirements;
- EN 12735: Copper and copper alloys - Seamless, round
copper tubes for air conditioning and refrigeration;
Others:
- UNI 1285-68: calculation of metal tubes resistance to
inside pressure;
3. designed, manufactured and commercialized in com-
pliance with the following EEC Directive:
- Machinery safety 98/37/EC;
- Low voltage equipment 73/23/EEC;
- Electromagnetic compatibility 89/336/EEC.
4
RV
RVH