To Next PageTo Next Page
Need help?Do you have a question about the AERMEC AN R407C and is the answer not in the manual?
Formal statement confirming the equipment's compliance with directives.
General notes on manual storage, reading, and safety precautions.
Detailed description of the AN series chillers and heat pumps, including features and applications.
Details on available model configurations and options.
Defines the operational boundaries of the unit based on ambient and water temperatures.
Physical dimensions for AN 020-025 models in standard, HA, and C versions.
Requirements for the unit's installation location and necessary clearances.
Steps for initial unit start-up, pre-start checks, and gas handling.
Details on electrical connections, ratings, and wiring diagrams.
Important safety warnings and guidelines for operating the unit.
Details regarding the equipment's warranty coverage and limitations.
Detailed description of major components within the refrigerant circuit.
Details on the unit's external casing, fan section, and their protection.
Description of the unit's electrical control panel and management card.
Information on key hydraulic components like expansion tanks, storage tanks, and pumps.
Covers high-pressure, low-pressure, and high-temperature switches.
Details on the microprocessor card's capabilities for unit management and monitoring.
Explanation of how thermostats control cooling and heating cycles.
Descriptions of optional accessories like DCPX, DRC, KR, PRD, PR1, SDP, RA, VT, GP.
Technical data for cooling capacity, input power, and E.E.R. across various models.
Key technical specifications including water content, sound pressure, and air flow.
Detailed electrical specifications including current ratings and connection sizes.
Hydraulic connection sizes and unit physical dimensions.
Weight specifications for the chiller units.
Technical data for heat pump cooling capacity, input power, and E.E.R.
Technical data for heat pump heating capacity, input power, and C.O.P.
Key technical specifications for heat pump models.
Technical data for condensing unit cooling capacity, input power, and E.E.R.
Key technical specifications including current, connections, dimensions, and weight.
Step-by-step guide for selecting standard AN unit models based on project requirements.
Step-by-step guide for selecting AN 'A' version units based on project requirements.
Graphical representation of operating limits for cooling mode based on temperatures.
Graphical representation of operating limits for condensing units in cooling mode.
Diagram to determine correction factors for cooling capacity and absorbed power.
Diagram to determine correction factors for cooling capacity and absorbed power.
Table providing correction factors for cooling mode when Delta T differs from 5°C.
Diagram for determining correction factors for heating capacity and absorbed power.
Table for applying pressure drop corrections based on average water temperature.
Table indicating maximum water content compatible with expansion tank capacity.
Correction factors for parameters deviating from nominal values.
Correction factors related to the fouling of heat exchanger surfaces.
Standard settings and adjustable ranges for control devices.
Configuration settings for various protection devices like pressure switches.
List of recommended components for completing the hydraulic circuit.
Instructions for installing and maintaining the water filter.
Guidance on managing water produced during heat pump defrost cycles.
Physical dimensions for AN 020-025 models in standard, HA, and C versions.
Physical dimensions for AN 30 models in standard, HA, and C versions.
Physical dimensions for AN 41 models in standard, HA, and C versions.
Physical dimensions for AN 50-80 models in standard, HA, and C versions.
Physical dimensions for AN 090 models in standard, HA, and C versions.
Physical dimensions for AN 090 H and AN 090 HA models.
Physical dimensions for AN 100, 150, and 200 models.
Dimensions and wiring diagrams for AN 250-300 models.
Instructions for receiving, inspecting, and handling the unit during installation.
Critical safety warnings regarding positioning and working near the unit.
Essential pre-operation checks including electrical and system integrity.
Step-by-step guide for initiating unit operation and setting parameters.
Procedures for system water filling, draining, and winter protection measures.
Specific guidelines for handling and maintaining R407C refrigerant to prevent damage.
Procedure for addressing unit malfunctions and alarm conditions.
Explanation of safety symbols used throughout the manual.
Key safety advice regarding operating limits and environmental factors.
Detailed electrical specifications, including connection types and current ratings.
Wiring diagrams for 230V single-phase models AN/AN A 020-025-030.
Wiring diagrams for 400V three-phase models AN/AN A 020-025-030.
Wiring diagrams for AN 041 and AN 041A models.
Wiring diagrams for the AN 090 model with 400V three-phase supply.
Wiring diagrams for AN 020-025-030 models across different voltage and phase configurations.
Wiring diagrams for AN 020A-025A-030A models.
Wiring diagrams for AN 020H-025H-030H 230V models.
Wiring diagrams for AN 020H-025H-030H 400V models.
Wiring diagrams for AN 020H to 080H series models.
Wiring diagrams for AN 020HA-041HA models.
Wiring diagrams for AN 041, 041A, 050, and 080 models.
Wiring diagrams for AN 041H-050H-080H-090H-041 HA models.
Wiring diagrams for the AN 090 H model.
Wiring diagrams for AN 050HA and AN 080HA models.
Wiring diagrams for the AN 041A model.
Wiring diagrams for AN 041H-050H-080H-090H-041 HA models.
Wiring diagrams for the AN 090 H model.
Wiring diagrams for the AN 090 H model.
Wiring diagrams for AN 050HA and AN 080HA models.
Wiring diagrams for the AN 090 HA model.
Wiring diagrams for the AN 090 H model.
Wiring diagrams for AN 100, 150, and 200 models.
Wiring diagrams for AN 090, 100, 150, and 200 models.
Wiring diagrams for AN 100A, 150A, and 200A models.
Wiring diagrams for AN 100H, 150H, and 200H models.
Wiring diagrams for AN 100HA, 150HA, and 200HA models.
Wiring diagrams for 230V single-phase AN 020-025-030 models.
Wiring diagrams for 230V single-phase AN 020C-025C-030C models.
Wiring diagrams for 400V three-phase AN 020-025-030 models.
Wiring diagrams for 400V three-phase AN 020C-025C-030C models.
Wiring diagrams for AN 041, 050, 080, and 090 models.
Wiring diagrams for AN 041C, 050C, 080C, and 090C models.
Wiring diagrams for AN 100, 150, and 200 models.
Wiring diagrams for AN 100C, 150C, and 200C models.
Wiring diagrams applicable to all AN C series units.
Wiring diagrams illustrating connections for remote control functionality.
Wiring details for the PR1 simplified remote panel.
Wiring diagrams for AN 250-300 models.
Wiring diagrams for AN 250-300 models.
Wiring diagrams for AN-A 250-300 models.
Wiring diagrams for AN-A 250-300 models.
Wiring diagrams for AN-H 250-300 models.
Wiring diagrams for AN-H 250-300 models.
Wiring diagrams for AN-HA 250-300 models.
Wiring diagrams for AN-HA 250-300 models.
Wiring diagrams for AN-C 250-300 models.
Wiring diagrams for AN-C 250-300 models.
Wiring diagrams for optional accessories like DCPX and DCPX10.
Contact number for automatically connecting to the nearest Aermec assistance center.
List of authorized Aermec technical assistance centers across Italy.
General
