51
IVEDITI 1707 - 4880981_01
Control panel flush with electronic thermostat and digital display, fan speed control with outputs 0-10V.
Wall installation.
• Ignition and switch-off
• Room temperature
• Operation mode
• Fan speed:
- fixed speed setting
- average fixed speed setting
- higher fixed speed setting
- automatic speed setting
• 2-pipe system
• 4-pipe system
• System with heater
• System with integration hea-
ter
• Flow water temperature
-
-
• Automatic operation mode
• Heating operation mode
• Cooling operation mode
• Anti-freeze mode
• Economy mode
• Flow water temperature
display
• Set-point temperature display
• Ventilation re-activated or
out of “Economy” mode, the
sensor indicates the presence
-
• Ventilation suspended or
activation from “Economy”
mode, the sensor indicates
the absence of people in the
-
• Ventilation suspended, the
contact indicates window
-
• Installer configuration error
or alarm
• Motor alarm
• Valve alarm
• Dirty filter function, indicates
when it is time to clean the
before cleaning is program-
• SWAI air and water tempe-
can be simultaneously con-
• VCF series valve
• VCF_X4 series valve
• VCFD series valve
• RX heater
• Additional coil for heating
only
• Multi-function electronic
ambient thermostat with
digital display
-
2000mm
It detects the flow water temperature and the ambient air in place of the probe inside the WMT21 panel.
2 SWAI probes can be simultaneously connected, one for water temperature and one for air temperature. Cable length L=2m.
SWAI
PANELS WITH ELECTRONIC THERMOSTAT FOR INVERTER FAN COILS, WALL INSTALLATION
To Next Page
Loading...
Need help?
General
