aermotor SPCM Series - User Manual

Centrifugal Pumps
INSTALLATION AND OPERATION MANUAL
Models SPCM Series Single Stage
Horsepower Range: 3 - 5 H.P.
60 Cycle
Single and Three Phase Installations
Owner’s Record
Pump Model:
Pump Serial No.:
Pump Date Code:
Motor H.P. Voltage Phase
Date of Installation:
Owner:
Installer:
Installer Phone Number:
AERMOTOR
293 Wright St., Delavan, WI 53115
Printed in U.S.A. ©2002 AER976 (11/11/02)

Summary

Safety Instructions

Understanding Safety Alerts

Explains safety alert symbols and signal words for potential personal injury.

General Operational Safety

Covers operational safety, motor temperature, freezing, and work area conditions.

Installation and Piping

Pump Connection Best Practices

Details optimal suction and discharge piping configurations for efficient pump operation.

Installation Site and Piping Guidelines

Guidance on pump placement, foundation, and specific suction/discharge piping requirements.

Electrical and Wiring

Electrical Safety and Voltage Match

Warns about electrical hazards and specifies voltage matching for safe motor operation.

Pump Wiring and Grounding

Step-by-step instructions for grounding and connecting the pump motor to the power supply.

Service and Maintenance

Motor Checks and Operating Precautions

Procedures for checking motor voltage, rotation, and precautions for operation and service.

Pump Priming, Storage, and Maintenance

Steps for priming the pump, general maintenance, and proper storage procedures.

Shaft Seal Replacement Procedure

Detailed instructions for removing the old shaft seal and installing a new one correctly.

Repair Parts Information

Pump Component Identification

Identifies pump components with part numbers and quantities for 3 and 5 HP models.

Suction Flange Assembly Details

Details the parts list and assembly for various suction flange sizes.

aermotor SPCM Series Specifications

General

Brand	aermotor
Model	SPCM Series
Category	Water Pump
Language	English