Need help?Do you have a question about the AeroWorks YAK 54 ARF-QB and is the answer not in the manual?
General| Construction | Balsa and plywood |
|---|---|
| Covering | UltraCote |
| Skill Level | Intermediate to advanced |
| Radio | 4+ channel |
| Servos | 5 |
Plane for experienced pilots beyond trainer-stage, suitable for aerobatic sport flying.
Lists major aircraft parts, landing gear, tail wheel, and assembly hardware.
Includes covering material, tools, adhesives, and items needed to complete assembly.
Using iron and heat gun to smooth wrinkles and seal seams.
Installing aileron servos, linkages, and control horns.
Installing elevator servos, linkages, and control horns.
Installing rudder hinges, servos, linkages, and the tail wheel assembly.
Installing landing gear struts, wheels, and wheel pants.
Mounting the engine, preparing firewall, and installing throttle/choke servos and linkages.
Installing various exhaust systems and related components.
Mounting and wiring the ignition module.
Assembling and securely mounting the fuel tank and lines.
Installing receivers, batteries, servos, regulators, and switches.
Preparing the cowl for exhaust exits and mounting it.
Installing choke pushrod and performing pre-flight checks.
Applying decals to the aircraft.
Setting CG and measuring control throws for optimal flight.
Comprehensive pre-flight inspection checklist.
List of popular aerobatic and 3D maneuvers.
Blank section for user notes.
To Next Page