11
IF YOUR WASHING MACHINE IS NOT NEW you will need to perform this procedure to help remove any detergent buildup that may contaminate your clothing.
1. Do not put clothes in the washer at this time. Set your machine to its largest load setting, cold water only.
2. Start the washer and let it run through every cycle.
3. Once it has finished, repeat Steps 1 and 2 three more times. Depending on the age and severity of detergent buildup, it may be necessary to perform Step
3 several times.
NOTE: If you have a front loading washer, odors can develop due to stagnant water left inside. If musty odors develop it may be necessary to run a
commercially available cleaner made especially for front loading washers to eliminate such odors.
IF YOUR WASHING MACHINE IS NEW, skip this section and continue below.
BEFORE USING YOUR LAUNDRY PRO 2.0 FOR THE FIRST TIME
DETERGENT AND FABRIC SOFTENER
You may choose to continue to use detergent and/or fabric softeners if desired. However, to completely
experience all the benefits of your new Laundry Pro 2.0, we recommend washing using nothing but cold
water. NEVER apply detergent directly to dry clothes. Allow washer to fill, then add detergent to prevent
staining on clothes.
COLD HOT
NORMAL OPERATION
Using your Laundry Pro 2.0 is as simple as turning on the washing machine.
Laundry Pro 2.0 is designed to use the COLD/COLD setting of your washing machine.
HEAVY STAINS
For heavy stains, pre-treat area, apply pre-treater, rub gently and let stand for several minutes. Wash as normal.
BEFORE WASHING CLOTHES
CAUTION
To avoid the possibility of water damage, should a hose leak, always have faucets accessible and turn o faucets when
washer is not in use.
USING YOUR LAUNDRY PRO 2.0
To Next Page
Loading...