Aerus LAUNDRY PRO 2.0 - SYSTEM SETUP AND OPERATION; Warning: Electrical Safety During Setup; Initial System Setup Steps

To Next Page

To Previous Page

SYSTEM SET UP

4. Start your washer. The status light should illuminate blue after a few seconds.

NOTE: Your Laundry Pro 2.0 will automatically turn on and o as your washing machine starts,

and stops.

1. Plug power cord into the wall outlet of your home’s electrical power system.

See page 4 for electrical requirements.

Status Indicator Lights

2. Turn on the cold water valve.

3. Check all hoses to ensure no water is leaking. Tighten if necessary.

WARNING

• Electrical Shock Hazard; when working with electrical connections, the appliance and surrounding area should be clean

and dry of any standing water; failure to follow these instructions can result in death, ﬁre, or electrical shock

• Electrical Shock Hazard; DO NOT use an extension cord. Failure to follow these instructions can result in death, ﬁre,

or electrical shock