4
please take measures (like sufficient ventilation) to prevent the asphyxia caused by the leakage of
refrigerant.
Use the specified electrical wires and attach the wires firmly to the terminal board (connection in such a
way that the stress of the wires is not applied to the sections).
Unit must be installed according to AS/NZS 3000:2018 wiring rules and the electrical connection must be
complete by a licensed electrician. Incorrect connection and fixing could cause a fire.
Perform electrical work according to the installation manual and be sure to use a suitable circuit. If
the capacity of the power circuit is insufficient or there is an incomplete electrical circuit, it could result
in a fire or an electric shock and damage to the unit.
The unit must always have an earthed connection.
Never use an extension cable to connect the unit to the electric power supply.
Perform the installation securely and please refer to the installation instructions.
Incorrect installation could cause an injury due to possible fire, electric shocks, the unit falling, leakage of
water etc.
Do not move/repair the unit yourself.
Before proceeding with any maintenance, service or repair work, the product must be isolated from the
mains electrical supply. Only qualified personnel should carry out these tasks. Improper movement or
repair on the unit could lead to water leakage, electrical shock, injury or fire.
Do not install the unit in a place where there is a chance of flammable gas leaks.
If there is a gas leak and gas accumulates in the area surrounding the unit, it could cause an explosion.
Perform the drainage/piping work according to the installation instruction.
If there is a defect in the drainage/piping work, water could leak from the unit and household goods could
To Next Page