AES EFI Series - Function Diagnosis

To Next Page

To Previous Page

When on status of Parameter Setting ,

and

display two“88”,it is asking you to enter your

password, press

and

to select, press to confirm.When password is right, displays

Parameter No. Displays related parameter value.

When on status of Debugging , displays the Number, 01 water pump debugging, 02 testing mode, and

displays ON or Off. The related mode symbol twinkles after entering into testing mode.

Display on each status:

Parameter Query Parameter Setting Debugging Status Error Query

Note：Value twinkles,means it is available for changing,or in verse

Function Diagnosis

When Heat Pump is off,Dial 4 switches to 1, give the heat pump power into status of function diagnosis

automatically.

Then dispaly will show each symbol and change every 1 second.