3
Safe use
The swimming pool heat pump works without oil, gas (petroleum) or other hazardous substance
which avoid potential risk that goes together. Moreover no gas (petroleum) connection or a fuel
tank is needed. No risk of intoxication, smell or pollution from leakage of such chemicals.
Self-diagnosis
When there is malfunction, the swimming pool heat pump will make self-diagnosis by displaying error
code from the control panel. The problem could be found out at a glance be referring to the
troubleshooting section of this manual.
SAFETY INSTRUCTIONS
To prevent injury to the user, other people, or property damage, the following instructions must be
followed. Incorrect operation due to ignoring of instructions may cause harm or damage.
Install the unit only when it complies with local regulations, by-laws and standards. Check the main
voltage and frequency. This unit is only suitable for earthed sockets, connection voltage 220 – 240 V ~ /
50Hz.
The following safety precautions should always be taken into account:
- Be sure to read the following WARNING before installing the unit.
- Be sure to observe the cautions specified here as they include important items related to safety.
- After reading these instructions, be sure to keep it in a handy place for future reference.
Do not install the unit yourself.
Incorrect installation could cause injury due to fire, electric shock, the unit falling or leakage of water.
Consult the dealer from whom you purchased the unit or a specialized installer.
Install the unit securely in a place.
When insufficiently installed, the unit could fall causing injury. When installing the unit in a small room,
To Next Page
Loading...