Aeware in.tune - Technical Specifications - General and Audio; General Unit Specifications; Audio Output Performance

34
in.tune instructions
General specifications:
Power supply voltage: 14,4V (11–16V allowable), negative ground
Max. current consumption: 15A
Back-up current (Ignition OFF): 15mA (Max.)
Speaker impedance: 4Ω
Operating temperature: 50˚C (122˚F) to –20˚C (68˚F)
Weight: 2.18kg (4.8lbs)
Dimensions (W x H x D):
Chassis: 178mm x 50mm x 190mm (7’’ x 2’’ x 7-1/2’’)
Front Panel: 212mm x 70mm x 32mm (8-3/8’’ x 2-3/4’’ x 1-1/4’’)
Audio specifications:
Max. power output: 50W x 4 ch (200W total)
Continuous average power output: 20W x 4 ch, into 4 Ω, 20Hz
to 20kHz, 1%TDH
Bass control: ± 10dB (100Hz)
Treble control: ± 10dB (10kHz)
Loudness contour: + 10dB (100Hz),
+ 10dB (10kHz) (at volume –20dB)
Max. preout level/load: 5V/10KΩ
Weather band:
Usable sensitivity (S/N=20dB): 2dBuV
Signal to noise ratio (S/N): 45dB
Frequency range: 162,40MHz – 162,55MHz
CD player:
Signal to noise ratio (S/N): > 65dB
Channel separation: > 50dB (at 1kHz)
Dynamic range: 80dB (at 1kHz)
Frequency response: 20Hz to 18kHz
Total harmonic distortion (THD): 0,5% (at 1kHz)
Sampling frequency: 44.1kHz
Specifications and design are subject to change without prior notice.
specifications