AFG 3.5AE - CHAPTER 3: ENGINEERING MODE; 3.1 ENGINEERING MODE ACCESS; 3.2 ENGINEERING MODE OVERVIEW

14
CHAPTER 3: Engineering Mode
3.1 ENGINEERING MODE
1. The key combination to enter engineering menu and eng8 menu is different regarding to different machine
types.
1.1 TM with powered elevation motor: incline up + speed down
1.2 TM without powered elevation motor: speed up + speed down
1.3 BK,EP and ascent trainer without powered elevation motor: resistance up + resistance down
1.4 EP and ascent trainer with powered elevation motor: incline up + resistance down.
2. Some of machine may not have certain engineer menu. Display “NA” or “NOT AVAILABLE” when certain
engineer menu is selected.
3.2 ENGINEERING MODE OVERVIEW
Press and hold incline up
and speed down for
3 ~5
seconds before running a
program will navigate to
engineering menu.
ENG4
ENG0
ENG1
ENG2 ENG3
+ button / up arrow button
+ button / up arrow button
+ button / up arrow button
+ button / up arrow button
+ button / up arrow button
ENG8
Press and incline up
+ speed down
for 3~5 seconds
- button / down arrow key
- button / down arrow key
- button / down arrow key
- button / down arrow key
- button / down arrow key
Press and hold
stop for 3~5 seconds
Press and hold
stop for 3~5 seconds
OR
Automatically after process finished
Press and hold
stop for 3~5 seconds
Press and hold
stop for 3~5 seconds
Press and hold
stop for 3~5 seconds