afloia Miro pro - Resetting Filter Alert; Optimal Placement for Purification

In order to keep the best purification eect, it is
recommended to keep the air purifier standing
on the floor and keep it at least 1ft (30cm) away
from the wall.
Resetting the Filter Replacement Alert
Install the filter into the machine.
Then install the base, rotate and tighten the
base along the direction marked "CLOSE".
5
6
Maximum Purification Eciency
How to Replace Filter
6
* Note
Failure to properly place the filter and base
on the air purifier, may result in air purifier
not working properly.
When the air purifier detects that the filter reaches the saturation value, the LED light
keeps flashing in red.
Please press the power button for 7 seconds to reset the filter replacement alert after
installing a new filter.
If it is the first time using the machine, do not reset it.
1 ft (30cm)
1 ft (30cm)