What causes IntFaultK error on Afore Inverter?
If your Afore Inverter displays an IntFaultK error, it indicates a bus voltage fault. To address this: 1. Check that the AC output wiring is well connected, using stranded copper cable. 2. Verify that the PV array configuration is correct. 3. Check the voltage difference between BUS+ and BUS- is not too high.
How to fix IntFaultB error on Afore Inverter?
If your Afore Inverter shows an IntFaultB error, it signifies that the bus voltage is out of range. You should check that the PV input voltage does not exceed 900Vdc per channel and ensure the AC output wiring is well connected.
What to do if Afore Inverter displays GridF.OutLim error?
If your Afore Inverter displays a GridF.OutLim error, it indicates that the grid is fluctuating or the grid frequency is outside of the set range. When the grid returns to normal, the inverter will restart automatically. Also, verify that the inverter frequency setting range is correct and that the AC output wiring is securely connected.
Why does my Afore Inverter show a GridV.OutLim error?
If your Afore Inverter shows a GridV.OutLim error, it means that the grid voltage is fluctuating or there's a voltage unbalance between phases. The inverter will restart automatically when the grid returns to normal. You can also check each phase's voltage via the inverter LCD.
General| Model | BNT036KTL |
|---|---|
| Rated Output Power | 36 kW |
| Max. DC Voltage | 1100V |
| Start Voltage | 250 V |
| MPPT Voltage Range | 200-1000V |
| Number of MPPTs | 2 |
| Rated AC Voltage | 400 V |
| AC Voltage Range | 310-480V |
| Nominal Frequency | 50/60 Hz |
| Total Harmonic Distortion (THD) | <3% |
| DC Connection | MC4 |
| Protection Degree | IP65 |
| Output Voltage | 400 V |
| MPPT Range | 200-1000V |
| Number of MPP Trackers | 2 |
| Protection Level | IP65 |
| Max. AC Power | 39600VA |
| Power Factor | >0.99 |
| Operating Temperature Range | -25°C to 60°C |
| Communication | RS485, Wi-Fi |
| Cooling | Smart cooling |
| Cooling Method | Smart cooling |
Lists essential safety measures for handling and operating the inverter.
Explains various safety symbols used in the manual and on the inverter.
Covers the essential steps for making electrical connections to the inverter.
Explains how to connect the PV strings to the inverter, including warnings.
Details the procedure and requirements for connecting the inverter to the grid.
Explains the importance and process of connecting the protective earth (PE) terminal.
Describes the components and indicators of the inverter's control panel.
Describes how to interpret fault codes and troubleshoot issues.
To Next Page
