AG Duo Operation Manual
AR / 25.07.23 / Version 1 10
2. Using overhead lifting by slinging the AG Duo with the dedicated lifting points.
If moving the AG Duo by overhead lifting, use the designated lifting points as identified
below. Ensure that the slings/chains are rated accordingly and that the angles of the
slings/chains are set in accordance with lifting regulations.
4 x M12 lifting eyes with the correct load rating will be required for overhead lifting. These
are to be screwed fully into the top of the hopper once the blanking bolts have been
removed (blanking bolts illustrated in the picture above).
Take care to avoid overhead power lines or other obstructions when lifting the
AG Duo.
To Next Page
Loading...