AG Duo Operation Manual
AR / 25.07.23 / Version 1 26
4.3.3 SWEEPING BRUSH HEIGHT
The sweeping brush is mounted on a floating arm that allows the brush to self-compensate
for unevenness in the floor and for the brush to float over joins in mats without lifting them.
To cater for differences in kerb height, there is a 3-position height setting to suit a wide
variety of heights. Due to the floating nature of the brush arm, this is not a critical
adjustment. It also adds the ability to adjust the pressure onto the brush, useful for cleaning
heavily soiled cubicles or cubicles that have not been mechanically swept before.
To Next Page
Loading...