AG Duo Operation Manual
AR / 25.07.23 / Version 1 31
If the circuit breaker has tripped, it can be reset by pushing the brown lever back into
position as shown in the following picture.
Double check that all brushing and dispensing controls are in their off positions, and the
forward/reverse switch is in the neutral position before turning the isolator to the on
position.
If the breaker trips out again after resetting, isolate the machine immediately and contact
your local dealer or Garnett Farms Engineering Ltd.
4.4.4 EMERGENCY STOP
To restart the AG Duo after the application of the emergency stop, the stop button should
be lifted and the reset button pressed.
The reset button must also be pressed whenever the AG Duo is powered up.
To Next Page
Loading...