AG Duo Operation Manual
AR / 25.07.23 / Version 1 30
4.4.3 CIRCUIT BREAKER
An extreme overload may cause the circuit breaker to trip. If this occurs, all power to all the
mechanisms will be lost.
IMPORTANT
Isolate the AG Duo before attempting to access the circuit breaker.
See Section 1.2.5.
Also, ensure all brushing and dispensing controls are in their off positions, the
forward/reverse switch is in the neutral position, and the parking brake is applied.
The circuit breaker is located behind the rear moulded black cover and inside the control
box. Access is gained by removing the six Phillip screws.
To Next Page
Loading...