AG Duo Operation Manual
AR / 25.07.23 / Version 1 43
6 REPLACEMENT OF SERVICE ITEMS
During service procedures, the AG Duo must be stopped and secured on flat
ground, the isolator turned off and the isolator switch removed. See Sections
1.2.5 and 1.2.9.
Wear appropriate PPE (Personal Protective Equipment) when carrying out all
maintenance or service work.
6.1 BRUSH REPLACEMENT
The brush is secured with three M10 nuts. Removing these nuts allows the brush to be
removed and replaced.
Use only genuine AG parts when replacing the brush. Other brushes may not be compatible
with the brush drive system and can damage other parts of the AG Duo.
To Next Page
Loading...