AG Duo Operation Manual
AR / 25.07.23 / Version 1 22
The direction and speed of the AG Duo are controlled by a forward/reverse switch and
throttle lever on the right of the handlebar panel.
The forward/reverse switch engages drive to the axle. It has three positions: forward,
neutral and reverse. Once engaged, the speed of the AG Duo is controlled by the throttle
lever.
When not in use, always leave the forward/reverse switch in its neutral position,
isolate the machine and apply the parking brake – See Sections 1.2.5 and 1.2.6.
If left on a slope, the AG Duo may creep slowly downhill. Be sure to apply the parking
brake.
Until confident of the use of all of the controls, it is advisable to complete several practice
runs to get used to the switches and speed of the machine.
1. Ensure the AG Duo is fully charged.
2. Ensure there are no bystanders around the AG Duo.
3. Ensure the hopper is empty.
4. Check all operations and familiarise yourself with the switch positions, actions and
forward and reverse drive speeds.
If operating the AG Duo on a downward slope, it is best to leave the forward/reverse switch
in the forward position and regulate the speed with the throttle lever. Do not be tempted to
engage reverse under these circumstances.
To Next Page
Loading...