44
or “d-M”, this means you are ready to set the meter’s
date. Select the M-d (Month-Day) or d-M (Day-
Month) date format with the DOWN (
) or UP ( )
arrow buttons. Your selection will be highlighted
by the blinking of the symbol. Press the CHECK
(
) button to confirm your selection and move on
to the year setting.
[4] Set the year (flashing) with the DOWN (
)
or UP (
) arrow buttons. Press the CHECK ( )
button to confirm your selection and move on to
the month setting.
[5] Set the month (flashing) with the DOWN (
)
or UP (
) arrow buttons. Press the CHECK ( )
button to confirm your selection.
[6] Set the day (flashing) with the DOWN (
) or
UP (
) arrow buttons. Press the CHECK ( )
button to confirm your selection and return to
the menu.
To Next Page
Loading...
