AGCO Gleaner S97 - Sunflowers; Flax

Sunflowers
Initial Combine Setup
Rotor RPM
Concave Setting
Fan Opening
Chaffer Opening
Sieve Opening
Chopper Speed
Elevato
r
Boots
450 0.4” 3 -6
0.625”
(16mm)
0.25”
(6mm)
Fast Solid
Initial Header & Header Drive Setup
• Header must be equipped with sunflower attachment to minimize headand
seed loss at the header.
• Variable speed header drive in slowest p
osition.
• Right hand pivot drive belt positioned on large countershaft drive sheave.
Tips
• Deactivate SmartCooling
™
hydraulic valve for sunflowers.
Additional Combine Setup
• May require additional Separator Blanking Kit #700961967 (3 blanks)
will block off separator grates and level out shoe distribution. Please have
your dealer contact Technical Service Support.
Flax
Initial Combine Setup
Rotor
RPM
Concave Setting
Fan Opening
Chaffer Opening
Sieve Opening
Chopper Speed
Elevato
r
Boots
800 0.0” - 0.4” 3 -5
0.625”
(16mm)
0.125”
(3mm)
Fast Solid
Initial Header & Header Drive Setup
• Flax is generally windrowed and a pickup attachment is used on
header.
• Variable speed header drive in slowest p
osition.
• Right-hand pivot drive belt positioned on large countershaft drive
sheave and small driven pivot sheave.
7